home *** CD-ROM | disk | FTP | other *** search
/ BBS in a Box 15 / BBS in a box XV-1.iso / Files / Tele / Hermes / Utilities / CallerInfo.sit / CallerInfo
Encoding:
Text File  |  1995-02-05  |  3.5 KB  |  3 lines  |  [TEXT/ttxt]

  1. Hello there.  I uploaded this file to let you know about a new external that is about to be released.  It is called Caller Info.  the purpose behind this external is to allow the Hermes BBS system to receive Caller ID directly from your modem.  Here is a little test that you can do to see if your existing modem is capable of gathering the Caller ID information:
  2.  
  3. In terminal mode, type:  #CID=2
  4. Then press return.  If the modem responds with 'OK' then that modem is capable of capturing the Caller ID information.  If it reports 'ERROR' then this new external will not work with that particular modem.
  5.  
  6. HOWEVER, it is possible that due to the different styles of modems out there, the #CID=2 is not the exact command needed to be used.  If you know that your modem does support Caller ID and the #CID=2 does not work, try looking in your modem book to find the exact command.  
  7.  
  8. The Caller ID information that is displayed should look something like this:
  9. 04123130323031323538353135323734313037394E....
  10.  
  11. All Caller ID information follows the same format, this no need to worry about the Caller ID in your area not conforming with this program.  There will be a text file explaning how to set up your BBS to use the Caller ID so it will work on your end.
  12.  
  13. • What this program will do
  14.  
  15. 1.  Capture the Caller ID
  16. 2.  Allow you to use the Caller ID information to the incoming calls.
  17. 3.  If you want it to, it will imprint the Caller ID in the logs.
  18. 4.  Make the BBS answer on the second ring.
  19.  
  20. • Important Note
  21.  
  22. In the previous version of Caller ID I released which was buggy, it locked the number of rings the BBS would answer on to a number that was not changeable.  luckly the Writers if Hermes II fixed a bug that would allow the Sysop to change it back to normal in the recent release.  When you decide to stop using the program, you need to set your number of rings to answer on back to your desired setting, else your BBS will not answer calls.
  23.  
  24. • Incompatible Programs
  25.  
  26. There are no incompatible programs.  The way I made this possible is that I did not use the Idle loop in the external.  I used the System loop.  Caller Info is not an Idle Loop external, it is a System loop external.  No other programs will hinder it's operations.
  27.  
  28. • Bug Reports
  29.  
  30. There are no bugs in this program.  The reason why it is not being released yet is because I am writing a companion program to go with it to allow you several special features like Autovalidation, E-Mail the Caller ID Info with the Validation message, etc...
  31.  
  32. • Flexibility
  33.  
  34. Caller Info is flexible enough to allow you to use it with 1 modem or 10 modems.  It is also flexable to allow you to have it on line 1, 3, 8 and 10 and leave the other lines alone if you desire.  You will not have to worry about switching your modems around to accomodate it.
  35.  
  36. • Protection
  37.  
  38. Like all externals that I write, they are copy protected and do expire after a pre determined period of time unless registered.
  39.  
  40. • To set up Caller ID
  41.  
  42. 1.  Make sure your modem(s) will be capable of using it.
  43. 2.  Contact your phone company and have them turn on the Caller ID on your
  44.      desired phone line(s).
  45. 3.  If you have roll-over (Hunching), the Caller ID will not be affected.  It will still
  46.      come through on the line as if the user called that particular line.
  47.  
  48. 2AMUG CD2
  49. CallerInfoTEXTttxtTEXTttxtÄ´[1A ÂL.%`%ArtMenu†% CD Adobe 2›sê¢2styl
  50. ġˇ›–l